test(01): UAT BLOCKER #2 — D-13 multi-EBML-concat plays only ~9 s; both committed fixture and UAT output exhibit same broken playback. Phase 1 architecture finding.

.planning/debug/d13-multi-ebml-concat-unplayable.md

@@ -0,0 +1,275 @@
+---
+slug: d13-multi-ebml-concat-unplayable
+status: investigating
+trigger: |
+  Phase 1 UAT Test 3 re-attempt post-Option-C produced a structurally-correct
+  3-segment WebM (SW logs confirm: "Merging 3 segments / Adding segment 0
+  size: 672159 / 1 size: 507559 / 2 size: 496181 / Final video blob size:
+  1675899 bytes, total segments merged: 3") but the resulting file plays
+  ONLY ~9 s in Chrome AND in mpv. Cross-checking the canonical fixture
+  committed at Phase 1 closure on 2026-05-15 (`tests/fixtures/last_30sec.webm`,
+  1633459 bytes, 3 segments per architecture) reveals it ALSO plays only ~9 s
+  in mpv. Operator confirmed both via mpv playback test.
+
+  This means D-13's "concat of self-contained WebM segments → playable 30 s
+  WebM" architecture is fundamentally broken. The 2026-05-15 Phase 1
+  closure was certified on an insufficient "operator-confirmed clean
+  Chrome playback" check that did not actually verify 30 s duration —
+  both the closure fixture and today's UAT-produced fixture exhibit
+  the same first-segment-only-plays behavior.
+
+  Phase 1's primary deliverable (REQ-video-ring-buffer) does not actually
+  produce a playable 30 s WebM. SPEC §10 #7 (`last_30sec.webm plays back
+  in a browser`) is NOT satisfied by the current architecture even
+  though it was marked Complete in REQUIREMENTS.md/ROADMAP.md/STATE.md
+  on 2026-05-15.
+created: 2026-05-16T16:56:41Z
+updated: 2026-05-16T16:56:41Z
+phase: 01-stabilize-video-pipeline
+related_uat: .planning/phases/01-stabilize-video-pipeline/01-UAT.md
+related_review_fix: .planning/phases/01-stabilize-video-pipeline/01-REVIEW-FIX.md
+prior_resolved_sessions:
+  - .planning/debug/resolved/d12-blob-port-transfer-fails.md
+  - .planning/debug/resolved/webm-playback-freeze.md
+  - .planning/debug/resolved/empty-archive-port-race.md
+architectural_impact: |
+  This is NOT a code-level bug; it's a wrong-architecture finding.
+  D-09..D-11 (single-continuous + age-trim + first-chunk-pin) was retired
+  in favor of D-13 (restart-segments + concat) on 2026-05-15 because
+  D-09..D-11 caused orphan-P-frame freezes (debug session
+  webm-playback-freeze). D-13 was supposed to fix that by making each
+  segment self-contained with its own EBML header + seed keyframe. But
+  D-13 only solved the freeze symptom — it did NOT solve the underlying
+  problem of producing a single playable 30 s WebM. Players see the
+  first EBML header, read its duration metadata (~9.94 s), and stop
+  there. Most Matroska/WebM players (ffmpeg/mpv/probably Chrome) do not
+  implement the multi-segment Matroska feature; the spec permits it but
+  doesn't mandate it.
+
+  The fix requires real WebM REMUX: extract the VP9 frames + cluster
+  timestamps from each of the 3 segments and rewrite them into a single
+  EBML-headered WebM with adjusted timestamps. This is significantly
+  more work than D-13 (~500-1000 LOC for a JS remuxer) but architecturally
+  necessary.
+---
+
+# Debug: D-13 multi-EBML-concat produces unplayable WebM (Phase 1 architecture failure)
+
+## Symptoms
+
+**Expected behavior:**
+When the operator clicks save, the produced `video/last_30sec.webm` plays
+for ~30 s in a browser (SPEC §10 #7) covering the most recent 30 s of
+captured screen.
+
+**Actual behavior:**
+- WebM file is structurally valid (3 segments concatenated per D-13 design)
+- All 3 segments arrive at SW per logs:
+    [SW:Main] Video buffer: 3 segments
+    [SW:Main] Merging 3 segments
+    [SW:Main] Adding segment 0, size: 672159 bytes
+    [SW:Main] Adding segment 1, size: 507559 bytes
+    [SW:Main] Adding segment 2, size: 496181 bytes
+    [SW:Main] Final video blob size: 1675899 bytes, total segments merged: 3
+- Resulting file (1675899 bytes) plays only ~9 s in Chrome
+- Same file plays only ~9 s in mpv
+- **The canonical Phase 1 closure fixture from 2026-05-15
+  (`tests/fixtures/last_30sec.webm`, 1633459 bytes) ALSO plays only
+  ~9 s in mpv** — operator verified by drag-drop test
+
+**Error messages:**
+None at the runtime layer. Recording is healthy, SW merge is healthy,
+download is healthy. The bug is in the PRODUCED FILE'S COMPATIBILITY
+with downstream players.
+
+ffprobe reports `duration=9.94 s` on both files — the first EBML
+header's reported duration. ffmpeg dry-run produces 299 muxer warnings
+(non-monotonic DTS at segment join boundaries) for both files — that's
+the segment boundary noise from concatenation, not playback failure.
+
+**Timeline:**
+- Bug introduced: commit `6a1a034` (Plan 01-07-debug-a3, 2026-05-15
+  "feat(fix-a3): activate D-13 restart-segments in src/offscreen/recorder.ts"
+  + commit `5530292` "feat(fix-a3): retire ring-buffer first-chunk pin
+  tests, add segment-rotation contract")
+- Operator-validated incorrectly: commit `cd61cbc` (2026-05-15
+  "test(01-07): commit regenerated last_30sec.webm fixture against D-13
+  recorder") + commit `7df72aa` (2026-05-15 "feat(01-07): close Phase 1 —
+  REQ-video-ring-buffer complete, SPEC §10 #7 satisfied"). The "operator
+  confirmed clean Chrome playback" assessment was insufficient — it
+  checked that the file played but did not measure the total playback
+  duration.
+- Discovered: 2026-05-16 UAT Test 3 re-attempt after Option C debug
+  session (`.planning/debug/resolved/empty-archive-port-race.md`)
+  fixed the silent-empty-video archive bug. With the empty-video
+  symptom retired, the underlying broken-playback issue surfaced
+  cleanly.
+
+**Reproduction:**
+1. `npm run build`
+2. `KEEP_PROFILE=0 ./smoke.sh`
+3. Load extension, click icon, wait 5+ minutes, click save
+4. Extract `video/last_30sec.webm` from the produced zip
+5. Open in mpv or Chrome — playback stops at ~9 s instead of ~30 s
+6. Verify the file structurally contains 3 segments via:
+   `ffmpeg -v warning -i FILE -f null -` (produces ~299 muxer warnings
+   = 3 segment join boundaries)
+7. OR verify against committed fixture: same behavior
+   (`/tmp/mokosh-test-committed-3seg.webm` and
+   `/tmp/mokosh-test-uat-3seg.webm` both play 9 s in mpv per operator)
+
+## Current Focus
+
+hypothesis: |
+  **H4 confirmed by operator empirical test**: D-13's "concat of self-
+  contained WebM segments → produce playable 30 s WebM" architecture
+  does not work in practice because most Matroska/WebM players do not
+  implement the multi-segment Matroska feature. The Matroska spec
+  permits multiple segments in one file but most decoders read only
+  the first segment's EBML header and stop there. ffmpeg's behavior
+  (which mpv inherits) is to honor the first EBML's duration metadata.
+  Chrome's MSE implementation appears to do the same (per UAT operator
+  observation).
+
+  **H3 confirmed by operator empirical test**: The 2026-05-15 Phase 1
+  closure's "operator-confirmed clean Chrome playback" check was
+  insufficient. The check did not measure total playback duration.
+  Both the canonical committed fixture and today's UAT-produced fixture
+  exhibit the same first-segment-only-plays behavior; the bug has
+  existed since D-13 was activated on 2026-05-15.
+
+  **Fix direction**: replace the file-concat merge with a real WebM
+  REMUX. Parse each segment's EBML structure, extract VP9 frames +
+  cluster boundaries + keyframe positions, write a SINGLE-EBML-header
+  WebM whose clusters carry adjusted (monotonic) timestamps. This
+  produces a file that any player can read end-to-end as one continuous
+  ~30 s stream.
+
+  **Candidate implementations**:
+  - `webm-muxer` npm package (Vanilla. ~10 KB. Browser + Node support.
+    Single-segment output. Active maintenance.)
+  - `ts-ebml` (EBML parser + writer. Allows manual control over
+    structure. ~50 KB.)
+  - Custom EBML parser (full control, ~500-1000 LOC, no dep weight)
+  - **Alternative path: MediaRecorder timeslice with cluster-aware trim**:
+    revisit retired D-09..D-11 architecture but trim ONLY on keyframe
+    boundaries (preserving every cluster from the most recent keyframe
+    onwards). This avoids the A3 orphan-P-frame freeze by guaranteeing
+    every kept cluster's references are present. ~200-400 LOC. The
+    risk: requires understanding EBML/Matroska cluster structure to
+    trim correctly.
+  - **Alternative path: WebCodecs API** (VideoEncoder + Muxer.js or
+    similar): full control over container framing. Significant rewrite
+    (~1000-2000 LOC). Most flexible but heaviest.
+
+  The remux approach (webm-muxer or equivalent) is likely the right
+  trade-off: small, well-tested library, preserves D-13's segment
+  lifecycle benefits (no orphan-P-frame freeze, ~10s rotation gap
+  acceptable), but produces a single-EBML output that all players
+  read correctly.
+
+test: |
+  RED test: introduce a playable-duration assertion to
+  tests/offscreen/webm-playback.test.ts. Use ffprobe -count_frames
+  -show_streams to count VIDEO FRAMES (not just metadata duration),
+  then divide by reported frame rate to compute actual playable
+  content duration. Assert actual_duration > 25_000 ms for the
+  generated/committed fixture. This test should FAIL against the
+  current D-13 architecture and PASS after the remux fix lands.
+
+  Alternative RED test: ffprobe -read_intervals -i FILE
+  '0%+#90000' (seek to last 90s, read all packets). Count packets
+  read. Should be ~600 packets for 30s @ ~20fps, not ~200 for 9s.
+expecting: |
+  RED test fails on current code (both fixture and freshly-recorded
+  output should fail the duration assertion). Debugger then implements
+  the chosen fix path (webm-muxer remux most likely) and re-asserts
+  GREEN.
+next_action: gather initial evidence from EBML parsing of both fixtures + research candidate JS remux libraries
+reasoning_checkpoint: ""
+tdd_checkpoint: ""
+
+## Constraints
+
+- TDD mode is ON (workflow.tdd_mode: true). RED test MUST land before
+  GREEN fix.
+- Auto-loaded memories: `feedback-gsd-ceremony-for-fixes.md` (no
+  hot-edits; route through proper GSD ceremony) and
+  `feedback-no-unilateral-scope-reduction.md` (no scope narrowing).
+- This fix may RETIRE the D-13 decision entirely OR keep D-13's
+  rotation lifecycle but replace the concat-merge with real remux.
+  CONTEXT.md will need amendment regardless.
+- This fix may invalidate the existing committed fixture
+  `tests/fixtures/last_30sec.webm` — once the architecture changes,
+  a fresh fixture will be needed.
+- The Phase 1 closure markers (REQUIREMENTS.md, ROADMAP.md, STATE.md)
+  marked REQ-video-ring-buffer complete on 2026-05-15; with this
+  finding they need to be REVERTED to in-progress until the fix
+  lands. That's a DOCUMENTATION change the orchestrator handles, NOT
+  a debugger action.
+- Phase 1 architecture amendment is large enough that this debug
+  session may need to escalate to a fresh Plan 01-08 (e.g. "WebM
+  remux for playable ring-buffer") rather than landing as a
+  hotfix in the debug session itself. The debugger should
+  CHECKPOINT to the orchestrator after root-cause confirmation +
+  fix-strategy options, before executing.
+
+## Files of Interest (preliminary)
+
+- src/offscreen/recorder.ts:
+  - 80-110: getSegments + segment array management
+  - 250-360: D-13 restart-segments rotation lifecycle
+  - 522-650: encodeAndSendBuffer (sends segments to SW)
+- src/background/index.ts:
+  - 129-150: decodeBufferSegments (base64 -> Blob)
+  - 395-420: mergeVideoSegments (the concat point — likely replaced by remux)
+  - 444-460: createArchive (calls mergeVideoSegments)
+- tests/offscreen/webm-playback.test.ts (existing — uses ffmpeg dry-run
+  to check decoder errors but does NOT check total playable duration)
+- tests/fixtures/last_30sec.webm (canonical fixture; needs regen post-fix)
+- .planning/phases/01-stabilize-video-pipeline/01-CONTEXT.md
+  (D-13 decision; needs amendment or retirement)
+- .planning/REQUIREMENTS.md
+  (REQ-video-ring-buffer; needs status flip from [x] back to [ ])
+
+## Evidence
+
+(populated by debugger; initial evidence below)
+
+### Operator empirical observations (2026-05-16)
+- `/tmp/mokosh-test-uat-3seg.webm` (today's UAT output, 1.68 MB, 3 segments):
+  played ~9 s in mpv
+- `/tmp/mokosh-test-committed-3seg.webm` (2026-05-15 closure fixture, 1.63 MB,
+  3 segments): played ~9 s in mpv
+- Earlier today operator confirmed Chrome playback of the UAT output was
+  also ~9 s, not ~30 s
+
+### SW log evidence (today's UAT run, 16:48:52)
+- 3 segments arrived at SW
+- Mergeed correctly: 672159 + 507559 + 496181 = 1675899 bytes (matches
+  archive WebM size)
+- No errors anywhere in delivery path
+
+### ffmpeg dry-run signature
+- Both files produce ~299 warning lines (segment join boundary noise)
+- Both files report `duration=9.94 s` via ffprobe -show_entries format=duration
+- Decoder errors: zero (segments are individually valid)
+
+## Eliminated
+
+(populated by debugger as hypotheses are ruled out)
+
+- H1 (Chrome version regression): unlikely given mpv exhibits same behavior
+  and mpv uses ffmpeg internally — not Chrome
+- H2 (today's encoding differs subtly from 2026-05-15): ruled out — committed
+  fixture also plays ~9 s in mpv, so it's been broken since D-13 activation
+- (H5: defective committed fixture in storage): ruled out — file size
+  matches expected (1.63 MB matches what was committed on 2026-05-15;
+  not bit-rot)
+
+## Resolution
+
+root_cause: ""
+fix: ""
+verification: ""
+files_changed: []

.planning/phases/01-stabilize-video-pipeline/01-UAT.md

@@ -1,5 +1,5 @@
 ---
-status: partial
+status: testing
 phase: 01-stabilize-video-pipeline
 source:
   - 01-01-SUMMARY.md
@@ -10,16 +10,34 @@ source:
   - 01-06-SUMMARY.md
   - 01-07-SUMMARY.md
 verifier_residue: 01-VERIFICATION.md (status: human_needed, OPR-1/2/3)
+debug_session_landed: .planning/debug/resolved/empty-archive-port-race.md (Option C — 8 commits 674c415..f0871c0)
 started: 2026-05-16T11:14:00Z
-updated: 2026-05-16T11:58:00Z
+updated: 2026-05-16T16:50:00Z
-paused_for: /gsd-debug investigation of Test 3 port-reconnect uncaught-error finding
+resumed_for: empirical re-verification of Option C fix (silent empty-video archive + port-reconnect race) before closing Phase 1
 ---
 
 ## Current Test
 
-[testing paused — 1 issue + 1 blocked outstanding; user routed to /gsd-debug
+number: 3
- immediately after Test 3 surfaced 3× Uncaught Error post-reconnect. Resume
+name: "OPR-2: Continuous Recording Across Tab Switches (re-attempt post-Option-C)"
- Test 3 save+play AND Test 4 SW Force-Stop after debug session lands a fix.]
+expected: |
+  Now that Option C landed (port lifecycle refactor + request-id'd BUFFER
+  routing + EmptyVideoBufferError surfaced to popup), Test 3 should now
+  produce a zip with a valid `video/last_30sec.webm` AND show NO
+  Uncaught Errors after the 290s mark (that timer is retired in favor
+  of the port-health-probe). Re-run smoke.sh with the freshly built
+  dist/ and confirm:
+  (a) Recording runs uninterrupted across tab switches (open 2-3 new
+      tabs, switch between them for ~30 s).
+  (b) NO `Uncaught Error: Attempting to use a disconnected port object`
+      appears in offscreen console — even past the 290 s mark.
+  (c) The save flow completes in reasonable time (< 5 s, NOT 600 s as
+      before).
+  (d) The produced zip contains `video/last_30sec.webm` of expected
+      size (~1.5 MB for 30 s VP9 1024×768-ish).
+  (e) The WebM plays continuously in Chrome (no freeze, no missing
+      seconds across tab-switch moments).
+awaiting: user response (smoke.sh output + zip contents)
 
 ## Tests
 
@@ -192,10 +210,11 @@ reason: |
 
 total: 4
 passed: 2
-issues: 1
+issues: 2 (Test 3 confirmed BLOCKER × 2: empty-archive fixed by Option C → new finding: D-13 multi-EBML-concat plays only ~9 s in mpv AND Chrome)
 pending: 0
 skipped: 0
-blocked: 1
+blocked: 2 (Test 3 retest after D-13 architectural fix; Test 4 SW Force-Stop deferred behind the same fix)
+paused_for: /gsd-debug d13-multi-ebml-concat-unplayable — Phase 1 architectural finding
 
 ## Gaps